- Long tap on the weather widget
Enter PIN if needed
Note: PIN can be viewed by tapping on “Show Device Pin” button in the respective Kiosk page on Manage
- Tap on View Nodes
- Tap on Node that needs network
- Tap on Configure WiFi
- Select the WiFi network of the Kiosk
- Enter the WiFi password & Connect
- Kiosk will connect & configure the node
- Node will reboot
- Node will disappear from the list during reboot
You will see an IP address upon successful configuration update
Note: Please check the WiFi credentials & re-configure if the IP address doesn’t appear
PayRange BluKey Connect-Kiosk Setup Guide
Reuben Delay
Article is closed for comments.
Comments
0 comments